It is recommended that you observe the fashion in which your inflatable is
received. Your inflatable is stored in a cylinder; sides folded into the middle,
folded again side over side and rolled front to back. The back of the unit will
have inflation chutes. Rolling your inflatable in this fashion allows the trapped
air to escape through the inflation chute while rolling and preparing the unit for
storage.
Your attraction is delivered in a “Swiss Roll”, secured with a strap or rope and
contained in a fitted storage bag. It is in this fashion that your inflatable should
be stored. A well cared for inflatable will maintain its “new look” and resist wear
much longer than if carelessly man handled. Never store an inflatable unit that
is wet. Mold and Mildew grows quickly on vinyl and this will not only discolor
your unit but will also make the attraction smell very bad! If the inflatable
becomes wet on an event, dry the unit as best you can before rolling. Upon
return to home base it is recommended that the unit be inflated until it is
completely dry.
Inflatables can prove to be extremely heavy items, take care in lifting your unit,
use hand trucks or dollies of adequate size, and always follow our
recommendations for the minimum amount of installers needed to safely install
and operate equipment.

How to storage your inflatables